Location: List Archives

List Archives

This forum is an archive of all posts to our mailing list over the past few years.  The forum is set read only therefore to contribute you will need to join our list community.  See more info about this here.

List Archives

Subject: [ActiveDir] Change private IP on a cluster- Reply
Prev Next
You are not authorized to post a reply.

AuthorMessages
josemedeirosUser is Offline

Posts:0

06/06/2006 4:55 AM  
Hi Jim,

Looks like your post never made it to the Active Dir list. If I recall
Exchange 2000 clustered still had dependencies on Wins, and I was told at a
Microsoft Technet event that Exchange 2003 clustered no longer had this
requirement, until I saw the Microsoft article that I pointed out
http://support.microsoft.com/default.aspx?scid=kb;en-us;837391 .
Jose
----- Original Message -----
From: "Jim Harrison"

To: ;
Cc:
Sent: Monday, June 05, 2006 6:17 AM
Subject: [ExchangeList] Re: Change private IP on a cluster

http://www.msexchange.org
-------------------------------------------------------837391 is getting
changed.

I'm putting in the technical update today.

It's wrong
Wrong, wrong, wrong.
Wrgonggitty-wrong-wrong Wrong!

WINS is *NOT* required for Exch functionality, but proper name
resolution support in the network *IS* required. If you've built your
network, name services & clients properly, using a "simple" name gets
you the same response as using FQDN in a "ping" command.

-----Original Message-----
From: exchangelist-bounce@xxxxxxxxxxxxx
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of Jose Medeiros
Sent: Sunday, June 04, 2006 10:29 PM
To: ActiveDir@xxxxxxxxxxxxxxxxxx; exchangelist@xxxxxxxxxxxxx
Cc: mike.newell@xxxxxxxxxxxx
Subject: [ExchangeList] Change private IP on a cluster

http://www.msexchange.org
-------------------------------------------------------Hi Mike,

Looks like you are going to also have dependencies on Wins and with the
MSDTC:

Exchange Server 2003 and Exchange 2000 Server require NetBIOS name
resolution for full functionality
http://support.microsoft.com/default.aspx?scid=kb;en-us;837391

How to configure Microsoft Distributed Transaction Coordinator on a
Windows
Server 2003 cluster
http://support.microsoft.com/default.aspx?scid=kb;en-us;301600

Regards,

Jose :-)

--------------------------------------------------------------------

----- Original Message -----
From: Jose Medeiros

To: ActiveDir@xxxxxxxxxxxxxxxxxx ; exchangelist@xxxxxxxxxxxxx
Cc: mike.newell@xxxxxxxxxxxx
Sent: Sunday, June 04, 2006 9:53 PM
Subject: Re: [ActiveDir] Change private IP on a cluster
Hi Mike,

I've only had to change a SQL 2000 Active / Active Cluster IP and it
involves some additional steps for SQL Virtual Names. It's been over 5
years
since I built an Exchange 2000 cluster, but I do not recall if Exchange
has
any dependencies (I would probably post this to the Exchange list and I
am
cc'ing them as well)

Take a look at :
Exchange Server 2003 Cluster Configuration Checklist
http://www.microsoft.com/technet/itsolutions/msit/operations/exchcluster
cklist.mspx?pf=true

Changing the IP address of network adapters in cluster server
http://support.microsoft.com/kb/230356/EN-US/

Or in PDF format at:
http://www.maned.com/support/knowledge_base/Roundhouse/Recommended_Readi
ng/Q230356.pdf

Also just in case you ever have to change it on a SQL:

How to change the network IP addresses of SQL Server virtual servers
http://support.microsoft.com/kb/244980/en-us

Hope this helps,

Sincerely,
Jose Medeiros
MCP+I, MCSE, NT4 MCT
408-765-0437 Direct
408-449-6621 Cell
------------------------------------------------------------------------
--------------------
----- Original Message -----
From: "Mike Newell"

To:
Sent: Sunday, June 04, 2006 12:53 PM
Subject: [ActiveDir] Change private IP on a cluster
Doh! Didn't mean to let this go without the OT:. Sorry.

________________________________

From: ActiveDir-owner@xxxxxxxxxxxxxxxxxx on behalf of Mike Newell
Sent: Sun 6/4/2006 11:40 AM
To: ActiveDir@xxxxxxxxxxxxxxxxxx
Subject: [ActiveDir] Change private IP on a cluster
Hey,
I have an Exchange 2003 active/passive cluster on Windows 2003 and I
need
to change the private ip on both nodes. I realize that while I'm
changing the IP the nodes will not talk to each other and likely kick
the passive node off or stop the cluster service for a few minutes on
the passive node.

Is there anything else I will need to do or look out for? I don't
*think* this is a big deal but since it's a production cluster, and I've
never had to do this, I thought I would check before I tried it.

Thanks again.

Mike.

-------------------------------------------------------
List info : http://www.activedir.org/List.aspx
List FAQ : http://www.activedir.org/ListFAQ.aspx
List archive: http://www.activedir.org/ml/threads.aspx
You are not authorized to post a reply.
Forums >ActiveDir Mail List Archive >List Archives > [ActiveDir] Change private IP on a cluster- Reply



ActiveForums 3.7
AdventNet Banner
Friends

Friends

Namescape
Members

Members

MembershipMembership:
Latest New UserLatest:jonrmeyer
New TodayNew Today:7
New YesterdayNew Yesterday:0
User CountOverall:4279

People OnlinePeople Online:
VisitorsVisitors:139
MembersMembers:1
TotalTotal:140

Online NowOnline Now:
01: alamedadad

Ads

Copyright 2008 ActiveDir.org
Terms Of Use