| Author | Messages | |
sbdcunha
Posts:52
 | | 06/10/2010 3:05 PM |
|
Thanks all u guys
I will try to setup the server in application mode and check t out
and let you guys know
thanks and regards
simon
> try /console too. you may get 2+1 :p but no such luck with 2008..
> console or zero session is goners..
>
> On Thu, Jun 10, 2010 at 6:38 AM, Chris <cmuncy@gmail.com> wrote:
>> ..and make sure that you buy the sufficient number of RDS CAL's for your
>> users.
>>
>> Chris
>>
>>
>> 2010/6/10 Tony Gordon <Tony.Gordon@hewitt.com>
>>>
>>> Install Terminal Services in application mode and it will allow more
>>> connections. You will need to have Terminal Services licensing service
>>> installed as well if you do not already have it.
>>>
>>>
>>>
>>> ----- Original Message -----
>>> From: "Benedict simon" [simon@kmun.gov.kw]
>>> Sent: 06/10/2010 01:58 PM ZE3
>>> To: activedir@mail.activedir.org
>>> Subject: [ActiveDir] only 2 remote desktop connections allowed??
>>>
>>>
>>>
>>>
>>>
>>> The information contained in this e-mail and any accompanying documents
>>> may contain information that is confidential or otherwise protected
>>> from
>>> disclosure. If you are not the intended recipient of this message, or
>>> if
>>> this message has been addressed to you in error, please immediately
>>> alert
>>> the sender by reply e-mail and then delete this message, including any
>>> attachments. Any dissemination, distribution or other use of the
>>> contents of
>>> this message by anyone other than the intended recipient is strictly
>>> prohibited. All messages sent to and from this e-mail address may be
>>> monitored as permitted by applicable law and regulations to ensure
>>> compliance with our internal policies and to protect our business.
>>> E-mails
>>> are not secure and cannot be guaranteed to be error free as they can be
>>> intercepted, amended, lost or destroyed, or contain viruses. You are
>>> deemed
>>> to have accepted these risks if you communicate with us by e-mail.
>>>
>>>
>>>
>>>
>>> Dear All,
>>>
>>> This is a slightly off topic but apprecite if someone could help me
>>>
>>>
>>> I have a windoows 2003 enterpise server and the remote desktop is
>>> limited
>>> only to 2 users
>>>
>>> when i try to RD from the third computer it says the
>>>
>>> the terminal server has excedeed the maximum no of allowed connections
>>>
>>> is there a way i can increase the no to say 10
>>>
>>> I tried to googling arround and also tried to change the licence but no
>>> luck
>>>
>>> really would apprecite your advice and help
>>>
>>>
>>> --
>>> Network ADMIN
>>> -------------
>>> KUWAIT MUNICIPALITY:
>>>
>>>
>>> --
>>> This message has been scanned for viruses and
>>> dangerous content by MailScanner, and is
>>> believed to be clean.
>>>
>>>
>>>
>>
>>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
--
Network ADMIN
-------------
KUWAIT MUNICIPALITY:
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
| | | |
| cmuncy
Posts:13
| | 06/10/2010 3:11 PM |
| Simon,
Don't forget that when you set up RDS, you'll have to add the users who you
want to use it in to the Remote users group via ADUC.
Chris
2010/6/10 Benedict simon <simon@kmun.gov.kw>
>
>
> Thanks all u guys
> I will try to setup the server in application mode and check t out
> and let you guys know
>
> thanks and regards
>
> simon
>
>
> > try /console too. you may get 2+1 :p but no such luck with 2008..
> > console or zero session is goners..
> >
> > On Thu, Jun 10, 2010 at 6:38 AM, Chris <cmuncy@gmail.com> wrote:
> >> ..and make sure that you buy the sufficient number of RDS CAL's for your
> >> users.
> >>
> >> Chris
> >>
> >>
> >> 2010/6/10 Tony Gordon <Tony.Gordon@hewitt.com>
> >>>
> >>> Install Terminal Services in application mode and it will allow more
> >>> connections. You will need to have Terminal Services licensing service
> >>> installed as well if you do not already have it.
> >>>
> >>>
> >>>
> >>> ----- Original Message -----
> >>> From: "Benedict simon" [simon@kmun.gov.kw]
> >>> Sent: 06/10/2010 01:58 PM ZE3
> >>> To: activedir@mail.activedir.org
> >>> Subject: [ActiveDir] only 2 remote desktop connections allowed??
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> The information contained in this e-mail and any accompanying documents
> >>> may contain information that is confidential or otherwise protected
> >>> from
> >>> disclosure. If you are not the intended recipient of this message, or
> >>> if
> >>> this message has been addressed to you in error, please immediately
> >>> alert
> >>> the sender by reply e-mail and then delete this message, including any
> >>> attachments. Any dissemination, distribution or other use of the
> >>> contents of
> >>> this message by anyone other than the intended recipient is strictly
> >>> prohibited. All messages sent to and from this e-mail address may be
> >>> monitored as permitted by applicable law and regulations to ensure
> >>> compliance with our internal policies and to protect our business.
> >>> E-mails
> >>> are not secure and cannot be guaranteed to be error free as they can be
> >>> intercepted, amended, lost or destroyed, or contain viruses. You are
> >>> deemed
> >>> to have accepted these risks if you communicate with us by e-mail.
> >>>
> >>>
> >>>
> >>>
> >>> Dear All,
> >>>
> >>> This is a slightly off topic but apprecite if someone could help me
> >>>
> >>>
> >>> I have a windoows 2003 enterpise server and the remote desktop is
> >>> limited
> >>> only to 2 users
> >>>
> >>> when i try to RD from the third computer it says the
> >>>
> >>> the terminal server has excedeed the maximum no of allowed connections
> >>>
> >>> is there a way i can increase the no to say 10
> >>>
> >>> I tried to googling arround and also tried to change the licence but no
> >>> luck
> >>>
> >>> really would apprecite your advice and help
> >>>
> >>>
> >>> --
> >>> Network ADMIN
> >>> -------------
> >>> KUWAIT MUNICIPALITY:
> >>>
> >>>
> >>> --
> >>> This message has been scanned for viruses and
> >>> dangerous content by MailScanner, and is
> >>> believed to be clean.
> >>>
> >>>
> >>>
> >>
> >>
> >
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
> >
>
>
> --
> Network ADMIN
> -------------
> KUWAIT MUNICIPALITY:
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
>
| | | |
| Bitzie
Posts:251
| | 06/10/2010 4:37 PM |
| And set up user permissions appropriately.
Lock down IE, lock down the shut down button, etc etc.
And don't do this on a DC either.
Benedict simon wrote:
> Thanks all u guys
> I will try to setup the server in application mode and check t out
> and let you guys know
>
> thanks and regards
>
> simon
>
>
>
>> try /console too. you may get 2+1 :p but no such luck with 2008..
>> console or zero session is goners..
>>
>> On Thu, Jun 10, 2010 at 6:38 AM, Chris <cmuncy@gmail.com> wrote:
>>
>>> ..and make sure that you buy the sufficient number of RDS CAL's for your
>>> users.
>>>
>>> Chris
>>>
>>>
>>> 2010/6/10 Tony Gordon <Tony.Gordon@hewitt.com>
>>>
>>>> Install Terminal Services in application mode and it will allow more
>>>> connections. You will need to have Terminal Services licensing service
>>>> installed as well if you do not already have it.
>>>>
>>>>
>>>>
>>>> ----- Original Message -----
>>>> From: "Benedict simon" [simon@kmun.gov.kw]
>>>> Sent: 06/10/2010 01:58 PM ZE3
>>>> To: activedir@mail.activedir.org
>>>> Subject: [ActiveDir] only 2 remote desktop connections allowed??
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> The information contained in this e-mail and any accompanying documents
>>>> may contain information that is confidential or otherwise protected
>>>> from
>>>> disclosure. If you are not the intended recipient of this message, or
>>>> if
>>>> this message has been addressed to you in error, please immediately
>>>> alert
>>>> the sender by reply e-mail and then delete this message, including any
>>>> attachments. Any dissemination, distribution or other use of the
>>>> contents of
>>>> this message by anyone other than the intended recipient is strictly
>>>> prohibited. All messages sent to and from this e-mail address may be
>>>> monitored as permitted by applicable law and regulations to ensure
>>>> compliance with our internal policies and to protect our business.
>>>> E-mails
>>>> are not secure and cannot be guaranteed to be error free as they can be
>>>> intercepted, amended, lost or destroyed, or contain viruses. You are
>>>> deemed
>>>> to have accepted these risks if you communicate with us by e-mail.
>>>>
>>>>
>>>>
>>>>
>>>> Dear All,
>>>>
>>>> This is a slightly off topic but apprecite if someone could help me
>>>>
>>>>
>>>> I have a windoows 2003 enterpise server and the remote desktop is
>>>> limited
>>>> only to 2 users
>>>>
>>>> when i try to RD from the third computer it says the
>>>>
>>>> the terminal server has excedeed the maximum no of allowed connections
>>>>
>>>> is there a way i can increase the no to say 10
>>>>
>>>> I tried to googling arround and also tried to change the licence but no
>>>> luck
>>>>
>>>> really would apprecite your advice and help
>>>>
>>>>
>>>> --
>>>> Network ADMIN
>>>> -------------
>>>> KUWAIT MUNICIPALITY:
>>>>
>>>>
>>>> --
>>>> This message has been scanned for viruses and
>>>> dangerous content by MailScanner, and is
>>>> believed to be clean.
>>>>
>>>>
>>>>
>>>>
>>>
>> --
>> This message has been scanned for viruses and
>> dangerous content by MailScanner, and is
>> believed to be clean.
>>
>>
>
>
>
| | | |
| gilvicente.ad
Posts:5
| | 06/10/2010 5:57 PM |
| I have the referred licenses, but now, how can I install these licenses on
the WS2008 Terminal Server?
2010/6/10 Susan Bradley <susan@sbslinks.com>
> And set up user permissions appropriately.
>
> Lock down IE, lock down the shut down button, etc etc.
>
> And don't do this on a DC either.
>
>
> Benedict simon wrote:
>
>> Thanks all u guys
>> I will try to setup the server in application mode and check t out
>> and let you guys know
>>
>> thanks and regards
>>
>> simon
>>
>>
>>
>>
>>> try /console too. you may get 2+1 :p but no such luck with 2008..
>>> console or zero session is goners..
>>>
>>> On Thu, Jun 10, 2010 at 6:38 AM, Chris <cmuncy@gmail.com> wrote:
>>>
>>>
>>>> ..and make sure that you buy the sufficient number of RDS CAL's for your
>>>> users.
>>>>
>>>> Chris
>>>>
>>>>
>>>> 2010/6/10 Tony Gordon <Tony.Gordon@hewitt.com>
>>>>
>>>>
>>>>> Install Terminal Services in application mode and it will allow more
>>>>> connections. You will need to have Terminal Services licensing service
>>>>> installed as well if you do not already have it.
>>>>>
>>>>>
>>>>>
>>>>> ----- Original Message -----
>>>>> From: "Benedict simon" [simon@kmun.gov.kw]
>>>>> Sent: 06/10/2010 01:58 PM ZE3
>>>>> To: activedir@mail.activedir.org
>>>>> Subject: [ActiveDir] only 2 remote desktop connections allowed??
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> The information contained in this e-mail and any accompanying documents
>>>>> may contain information that is confidential or otherwise protected
>>>>> from
>>>>> disclosure. If you are not the intended recipient of this message, or
>>>>> if
>>>>> this message has been addressed to you in error, please immediately
>>>>> alert
>>>>> the sender by reply e-mail and then delete this message, including any
>>>>> attachments. Any dissemination, distribution or other use of the
>>>>> contents of
>>>>> this message by anyone other than the intended recipient is strictly
>>>>> prohibited. All messages sent to and from this e-mail address may be
>>>>> monitored as permitted by applicable law and regulations to ensure
>>>>> compliance with our internal policies and to protect our business.
>>>>> E-mails
>>>>> are not secure and cannot be guaranteed to be error free as they can be
>>>>> intercepted, amended, lost or destroyed, or contain viruses. You are
>>>>> deemed
>>>>> to have accepted these risks if you communicate with us by e-mail.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Dear All,
>>>>>
>>>>> This is a slightly off topic but apprecite if someone could help me
>>>>>
>>>>>
>>>>> I have a windoows 2003 enterpise server and the remote desktop is
>>>>> limited
>>>>> only to 2 users
>>>>>
>>>>> when i try to RD from the third computer it says the
>>>>>
>>>>> the terminal server has excedeed the maximum no of allowed connections
>>>>>
>>>>> is there a way i can increase the no to say 10
>>>>>
>>>>> I tried to googling arround and also tried to change the licence but no
>>>>> luck
>>>>>
>>>>> really would apprecite your advice and help
>>>>>
>>>>>
>>>>> --
>>>>> Network ADMIN
>>>>> -------------
>>>>> KUWAIT MUNICIPALITY:
>>>>>
>>>>>
>>>>> --
>>>>> This message has been scanned for viruses and
>>>>> dangerous content by MailScanner, and is
>>>>> believed to be clean.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>> --
>>> This message has been scanned for viruses and
>>> dangerous content by MailScanner, and is
>>> believed to be clean.
>>>
>>>
>>>
>>
>>
>>
>>
>
>
| | | |
| Bitzie
Posts:251
| | 06/12/2010 8:02 AM |
| You set up the TS licensing server... what's your DCs located and what
version?
In my case I set up the TS licensing server on the Win2k8 and did the
hack in the group policy so that the server would find itself as the
licesning server.
Then you go into the licensing console and stick the product cal code
(if a cal code) or agreement number if VL and 'activate' the TS/RDP cals.
http://technet.microsoft.com/en-us/library/cc754034(WS.10).aspx
Gil wrote:
> I have the referred licenses, but now, how can I install these
> licenses on the WS2008 Terminal Server?
>
> 2010/6/10 Susan Bradley <susan@sbslinks.com <mailto:susan@sbslinks.com>>
>
> And set up user permissions appropriately.
>
> Lock down IE, lock down the shut down button, etc etc.
>
> And don't do this on a DC either.
>
>
> Benedict simon wrote:
>
> Thanks all u guys
> I will try to setup the server in application mode and check t out
> and let you guys know
>
> thanks and regards
>
> simon
>
>
>
>
> try /console too. you may get 2+1 :p but no such luck
> with 2008..
> console or zero session is goners..
>
> On Thu, Jun 10, 2010 at 6:38 AM, Chris <cmuncy@gmail.com
> <mailto:cmuncy@gmail.com>> wrote:
>
>
> ..and make sure that you buy the sufficient number of
> RDS CAL's for your
> users.
>
> Chris
>
>
> 2010/6/10 Tony Gordon <Tony.Gordon@hewitt.com
> <mailto:Tony.Gordon@hewitt.com>>
>
>
> Install Terminal Services in application mode and
> it will allow more
> connections. You will need to have Terminal
> Services licensing service
> installed as well if you do not already have it.
>
>
>
> ----- Original Message -----
> From: "Benedict simon" [simon@kmun.gov.kw
> <mailto:simon@kmun.gov.kw>]
> Sent: 06/10/2010 01:58 PM ZE3
> To: activedir@mail.activedir.org
> <mailto:activedir@mail.activedir.org>
> Subject: [ActiveDir] only 2 remote desktop
> connections allowed??
>
>
>
>
>
> The information contained in this e-mail and any
> accompanying documents
> may contain information that is confidential or
> otherwise protected
> from
> disclosure. If you are not the intended recipient
> of this message, or
> if
> this message has been addressed to you in error,
> please immediately
> alert
> the sender by reply e-mail and then delete this
> message, including any
> attachments. Any dissemination, distribution or
> other use of the
> contents of
> this message by anyone other than the intended
> recipient is strictly
> prohibited. All messages sent to and from this
> e-mail address may be
> monitored as permitted by applicable law and
> regulations to ensure
> compliance with our internal policies and to
> protect our business.
> E-mails
> are not secure and cannot be guaranteed to be
> error free as they can be
> intercepted, amended, lost or destroyed, or
> contain viruses. You are
> deemed
> to have accepted these risks if you communicate
> with us by e-mail.
>
>
>
>
> Dear All,
>
> This is a slightly off topic but apprecite if
> someone could help me
>
>
> I have a windoows 2003 enterpise server and the
> remote desktop is
> limited
> only to 2 users
>
> when i try to RD from the third computer it says the
>
> the terminal server has excedeed the maximum no of
> allowed connections
>
> is there a way i can increase the no to say 10
>
> I tried to googling arround and also tried to
> change the licence but no
> luck
>
> really would apprecite your advice and help
>
>
> --
> Network ADMIN
> -------------
> KUWAIT MUNICIPALITY:
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
>
>
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
>
>
>
>
>
>
>
| | | |
| gilvicente.ad
Posts:5
| | 06/15/2010 12:16 PM |
| Thanks Susan for the link,
It will be too much well-usable.
My DCs are in the same domain wide area at a single domain Windows Server
2003 forest. And I'm migrating an NT Licensing Server to a new WS2008 one
with new 3.500 WS2008 CALS.
I will begin this after the World Cup, Here in Brazil we "stops" during
this Season!
Thanks a lot!
2010/6/12 Susan Bradley <susan@sbslinks.com>
> You set up the TS licensing server... what's your DCs located and what
> version?
>
> In my case I set up the TS licensing server on the Win2k8 and did the hack
> in the group policy so that the server would find itself as the licesning
> server.
>
> Then you go into the licensing console and stick the product cal code (if a
> cal code) or agreement number if VL and 'activate' the TS/RDP cals.
>
> http://technet.microsoft.com/en-us/library/cc754034(WS.10).aspx<http://technet.microsoft.com/en-us/library/cc754034%28WS.10%29.aspx>
>
> Gil wrote:
>
>> I have the referred licenses, but now, how can I install these licenses on
>> the WS2008 Terminal Server?
>>
>> 2010/6/10 Susan Bradley <susan@sbslinks.com <mailto:susan@sbslinks.com>>
>>
>> And set up user permissions appropriately.
>>
>> Lock down IE, lock down the shut down button, etc etc.
>>
>> And don't do this on a DC either.
>>
>>
>> Benedict simon wrote:
>>
>> Thanks all u guys
>> I will try to setup the server in application mode and check t out
>> and let you guys know
>>
>> thanks and regards
>>
>> simon
>>
>>
>>
>> try /console too. you may get 2+1 :p but no such luck
>> with 2008..
>> console or zero session is goners..
>>
>> On Thu, Jun 10, 2010 at 6:38 AM, Chris <cmuncy@gmail.com
>> <mailto:cmuncy@gmail.com>> wrote:
>>
>> ..and make sure that you buy the sufficient number of
>> RDS CAL's for your
>> users.
>>
>> Chris
>>
>>
>> 2010/6/10 Tony Gordon <Tony.Gordon@hewitt.com
>> <mailto:Tony.Gordon@hewitt.com>>
>>
>> Install Terminal Services in application mode and
>> it will allow more
>> connections. You will need to have Terminal
>> Services licensing service
>> installed as well if you do not already have it.
>>
>>
>>
>> ----- Original Message -----
>> From: "Benedict simon" [simon@kmun.gov.kw
>> <mailto:simon@kmun.gov.kw>]
>> Sent: 06/10/2010 01:58 PM ZE3
>> To: activedir@mail.activedir.org
>> <mailto:activedir@mail.activedir.org>
>> Subject: [ActiveDir] only 2 remote desktop
>> connections allowed??
>>
>>
>>
>>
>>
>> The information contained in this e-mail and any
>> accompanying documents
>> may contain information that is confidential or
>> otherwise protected
>> from
>> disclosure. If you are not the intended recipient
>> of this message, or
>> if
>> this message has been addressed to you in error,
>> please immediately
>> alert
>> the sender by reply e-mail and then delete this
>> message, including any
>> attachments. Any dissemination, distribution or
>> other use of the
>> contents of
>> this message by anyone other than the intended
>> recipient is strictly
>> prohibited. All messages sent to and from this
>> e-mail address may be
>> monitored as permitted by applicable law and
>> regulations to ensure
>> compliance with our internal policies and to
>> protect our business.
>> E-mails
>> are not secure and cannot be guaranteed to be
>> error free as they can be
>> intercepted, amended, lost or destroyed, or
>> contain viruses. You are
>> deemed
>> to have accepted these risks if you communicate
>> with us by e-mail.
>>
>>
>>
>>
>> Dear All,
>>
>> This is a slightly off topic but apprecite if
>> someone could help me
>>
>>
>> I have a windoows 2003 enterpise server and the
>> remote desktop is
>> limited
>> only to 2 users
>>
>> when i try to RD from the third computer it says the
>>
>> the terminal server has excedeed the maximum no of
>> allowed connections
>>
>> is there a way i can increase the no to say 10
>>
>> I tried to googling arround and also tried to
>> change the licence but no
>> luck
>>
>> really would apprecite your advice and help
>>
>>
>> --
>> Network ADMIN
>> -------------
>> KUWAIT MUNICIPALITY:
>>
>>
>> --
>> This message has been scanned for viruses and
>> dangerous content by MailScanner, and is
>> believed to be clean.
>>
>>
>>
>>
>>
>> --
>> This message has been scanned for viruses and
>> dangerous content by MailScanner, and is
>> believed to be clean.
>>
>>
>>
>>
>>
>>
>>
>>
>
| | | |
|
|